Lathe Mill Combo,Bench Lathe,Drilling Milling Machine Manufacture
86-551-2565098     [email protected]
EnglishFrançaisDeutschItalianoPortuguêsРусскийEspañol

Combo Lathe/Mill Machine

» Combo Lathe/Mill Machine

    • Combo Lathe/Mill Machine MP330G Plus

    CATEGORY AND TAGS:
    Combo Lathe/Mill Machine , ,
    • All gear drive headstock for lathe and mill-drill are harded and ground
    • Mill/drill spinder with 4 steps speed from 220-2200rpm
    • Two ‘V’ guaidway and gears in headstock are hardened and ground
    • Sildeway are sticked with soft wear strip for lightweight and sensitive operating
    • Mill-drill headstock tilts 45º in left/right and swivel 360º in vertical
    • Automatic longitudinal and cross feeds
    • 2 separate electric motor for lathe and mill-drill
    enquiry
    • Specifications

    Combo Lathe/Mill Machine MP330G Plus

    Product Feature

    Heavy-duty, precision and high quality and combinated turning, drilling, milling, boring and slotting in one machine. This is the machine for the most serious hobbyist or even a busy but crowded job shop. Its easy operation and to meet the various mechanical engineer requirements. This is an exceptional value and will make a great addition to any shop.

     

    • All gear drive headstock for lathe and mill-drill are harded and ground
    • Mill/drill spinder with 4 steps speed from 220-2200rpm
    • Two ‘V’ guaidway and gears in headstock are hardened and ground
    • Sildeway are sticked with soft wear strip for lightweight and sensitive operating
    • Mill-drill headstock tilts 45º in left/right and swivel 360º in vertical
    • Automatic longitudinal and cross feeds
    • 2 separate electric motor for lathe and mill-drill

     

    Product Specifications

    Specifications MP330G PLUS
    Lathe
    Swing over bed 床身上回转直径 330mm
    Swing over slide 刀架上回转直径 185mm
    Distance between centers 两顶尖距离 915mm
    Bed width 床身宽 160mm
    Spindle bore 主轴通孔 38mm
    Spindle speed 主轴转速 65-1800rpm
    Spindle taper 主轴锥度 MT5
    Travels of tool-post 小刀架行程 100mm
    Travels of carriage 中拖板行程 160mm
    Range of logitudinal feed 纵向进给范围 0.087-2.049mm/r
    Range of cross feed 横向进给范围 0.019-0.444mm/r
    Metric threading 公制螺纹种数/范围 14 / 0.25-6mm
    Inch threading 英制螺纹种数/范围 18 / 120-4TPI
    Quill travles of tailstock 尾座套筒行程 80mm
    Tailstock taper 尾座套筒锥度 MT3
    Motor power 电机功率 1100W / 1500W
    Drilling / Milling 　 　
    Max. drilling capacitor 最大钻孔 16mm
    Max. face milling capacitor 最大盘铣 63mm
    Max. end milling capacitor 最大立铣 20mm
    Spindle speed 转速级数/范围 6 / 190-2250rpm
    Spindle taper 主轴锥度 MT3
    Stroke of spindle 主轴行程 180
    Sindle nose to table 主轴端面至工作台面 315
    Sindle center to column 主轴中心线至立柱面 210
    Diameter of column 立柱直径 80mm
    T-Sslot size ‘T’型槽工作台尺寸 2 x 16 x 90
    Tilting of milling head 钻铣头左右倾斜 ±90º
    Rotation of milling head 钻铣头垂直面旋转 360º
    Motor power 钻铣电机功率 900W
    Net/gross weight 机床净/毛中 520/565kg
    Dementions 机床尺寸 1660x770x1370mm

     

    Standard Accessories

    Optional Accessories By Extral Cost：

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Enquiry Form (we will get back to you ASAP)

    Name:
    *
    Email:
    *
    Message:

    Verification:
    3 + 9 = ?

    Maybe you like also